•   Products  
•  
•  Interactive houses
•  
•   Photo gallery  
•  
•  Find a Contractor 
  or a Retailer
•  
•   Photo contest  

• POLYMER ROOF TILES
  • Novishingle^TM
    Cedar shingles Replica
  • Novislate^TM
    Slate tile replica
  • Noviclay^TM
    Clay tile replica
  • Product comparison
  • FAQ

• POLYMER SIDINGS
  • family
    • Novishake^TM RS8
      8’ Cedar Shake
    • Novishake^TM RS
      Roughsawn Cedar
    • Novishake^TM SE
      Staggered Edge Shake
    • Novishake^TM PS
      Perfect Shake
    • Novishake^TM HS
      Hand Split Shake
    • Novishake^TM HR
      Half-Round
  • family
    • Noviplank^TM S8
      8" Cedar Plank
    • Noviplank^TM D6
      D6" Cedar Plank
  • family
    • NoviBric^TM HL
      Hand-Laid Brick
  • family
    • NoviStone^TM HC
      Hand Cut Stone
    • NoviStone^TM SK
      Stacked Stone
  •  
  • Revelation brochure
  • Inspiration brochure
  • Product comparison
  • FAQ

• family
  • NoviVent^TM
    All Gable Vents

• family
  • NoviBloc^TM
    All Mounting Blocks

• Columns
  • Polymer column
  • Aluminium column

• Decorative exterior shutters

• Roof vent

Polymer column
Decorative and structural

• Brochure
• Photos
• Innovative Polymers
• Fast-Fit Serie

• New architectural design
• Superior quality polymer injection
• Load bearing
• 104" (264.1 cm) long easily cut
• Compatible with railing systems
• Ease of installation
• Durable and maintenance-free
• U.V stabilised against discoloration
• Color through process

Models available

Dimensions: 5.5" (13.8 cm) x 5.5" (13.8 cm) x 104" (264.2 cm)
* Model also available in 120" (300 cm).
Material thickness: 0.125" (0.3 cm)
Pieces per carton: 1
Approx. weight per carton: 22 lbs / 10 kg

Base, cap and mounting plates included.

Note: Model also available in 120”. (300 cm)

Note: 12000 lbs also available upon request

Standard color available

White A#1

Light Clay A#19

PVC White A#27

Download PDF color chart

Polymer column
Decorative and structural

Installation

1- Determine the height needed of the column by measuring the distance from the ground to the ceiling and subtracting the thickness (0.060” or 1.5 mm) of two support fixtures. *

2- If you are installing a ramp, you must make sure that you keep a length of 36” (91 cm) to 42” (107 cm) on the lower square part of the column (A). To maintain the proper proportion of the column, we suggest that you cut 2 times more from the top (C) than what is cut from the bottom (A).

Installation with polymer base:

When the column has been cut to the desired length, slide it into place with the support fixtures inserted in the column. (see figure 1) Once the support fixtures are secured in place, install the base around the column. (see figure 2)

Figure 1                             Figure 2

Installation without a polymer base :

Cut the four edges off the support fixtures and secure them in place. (see figure 3) After the column has been cut to the desired height, the ceiling must be lifted to insert the column onto the attachment plates. (see figure 4)

Figure 3                             Figure 4

* The aluminum reinforcement tube must be cut at a right angle with the exterior of the column to ensure that both are exactly the same length.

Polymer column
Decorative and structural

Warranty

Quality warranty

All of our polymer injection columns are made to respond to the industry’s high standards and North American’s very strict specifications.

Opting for the continuous improvement of our products, we are able to provide a Limited Lifetime Warranty.

Terms

Novik inc. offers a warranty to the original buyer for the replacement of any product when the installation is completed in accordance with the manufacturer’s instructions. Novik inc. also offers a warranty from any defect in the polymer column's manufacturing including undulation, cracking or excessive discoloration when exposed to normal weather conditions. Novik inc. shall not be liable for labour expenses or any damages resulting from the use of this product, or have any other liability, except for the replacement value of the column. This warranty is effective immediately upon delivery of the product.

Limitations

Novik’s Warranty is strictly subject to these conditions :

• Applies only to Novik products used for their specific purpose.
• Does not apply to any damages resulting from misuse, negligence or incorrect installation.
• Does not apply to damages resulting from pollution, mildew, exposure to chemical products or inappropriate cleaners.
• Does not apply when the polymer column has been painted or varnished.

Warranty claims

The buyer has to provide a written declaration detailing the damage and the manufacturing defect together with original proof of purchase to the following address :

Novik inc.,
Customer Service Department,
160, rue des Grands-Lacs
St-Augustin-de-Desmaures (Québec)
Canada  G3A 2K1

Coverage of the Limited Lifetime Warranty