Half-round decorative panel 
The perfect finishing touch to add curb appeal and elegance
- Superior quality: injection molding.
- High quality polymer resists warping and impact at extreme temperature variations.
- Superior color-thru panel with U.V. stabilizer to prevent discoloration.
- Natural wood grain appearance.
- Distinctive touch that highlights architectural elements.
- Easy to install.
Panel
Panel size: 32" (81.3 cm) x 10" (25.4 cm)
Material thickness: 0.080" (0.2 cm)
Pieces per carton: 22
Sq. ft. per carton: 33 (3.1 m²)
Approx. weight per carton: 18 lbs / 8.2 kg
Available colors
Click on the colors to increase
Download PDF color chart
Legend - Total quantity : |
| A) Stock standard colors : shipped within 5 business days |
| B) Non-stock standard colors : shipped within 10 business days |
| C) Special order colors : shipped within 20 business days |
Note: |
Representation of colors may be slightly modified due to different computer systems. Check store samples. |
Coordinating accessories
Click on the image to increase
 |
Half-round starter clip
Length: 1" x Height: 4.5"
(2.5 cm x 11.25 cm) |
| |
J-Channel |
| |
Use 12' (3.66 m) Standard J-Channel |
Other documentation
Half-Round
Imagine... a look that lasts forever!
Installation guide
General information
CAUTION: Remember that polymer undergoes expansion/contraction due to variations in temperature.
1- Always begin the installation at the lowest part of the structure, from left to right.
2- Always hammer in the center of the installation holes. Each complete panel must be nailed by 4 nails at maximal intervals of 16” (40,64cm) or less (Figure 1). If panels are installed on a furring wall, a furring strip is required behind each nail. Always use non corrosive nails or screws that can penetrate a minimum of 3/4” (1,91cm) into a solid surface.
3- Never hammer the nails in completely. Leave a gap of 1/16’’ (0,16cm). The stoppers located around the holes stop the hammer from driving the nails in too far, and provide the required gap (Figure 2)
4- Make sure that all pieces are correctly inserted into one
another (Figure 3).
5- When using a J-trim, leave a space of 1/4’’ (0,64cm)
between the inside wall of the J-trim and the siding
(Figure 4). Use standard 7/8’’ (2,22 cm) J-trim.
Note: To cut the material, it is recommended to use a
circular saw with a finishing blade.
Installation steps with J-trim as starter strip
1- Attach a 7/8” (2,22cm) J-trim on the perimeter. Make sure
that the horizontal starting line is perfectly level (Figure A).
2- Draw a plumb line starting at the highest point and
perpendicular to the horizontal line (Figure A).
3- Cut the siding at 1 1/4” (3,18cm) below the bottom of
the scale hollows. Cut only the quantity needed for one
complete starting row (Figure B).
4- Mesure the distance A (Figure A), substract 1 1/4”
(3,18cm) and divide by 6 1/2” (16,51cm). This will give
you the amount of rows required to complete the gable
excluding the starting row. For an odd number of rows,
install the starting row so that hollow between two
scales is in the middle (Figure C). For an even number
of rows, install the starting row so that the tip of scale is
in the middle (Figure D). By doing so, you will finish the
last row with a complete scale in the middle of the gable
(Figure G).
5- Install the starting row previously cut (step 2) in the Figure E
J-trim used as a starter strip. Leave a gap of 1/4” (0,64cm)
between the inside wall of the J-trim and the siding. Leave
a gap of 3/16” (0,48cm) between every panel and make
sure that the row is firmly in place and will not come out
of the J-trim (Figure E).
Note: Do not nail into the extremities holes of the
panel (1 - Figure H), except if there no more nailing
hole above the piece (2 - Figure H).
Installation over siding
1- Mesure the distance A (Figure A1), add 4” (10,2cm) and
divide by 6 1/2” (16,51cm). This will give you the amount
of rows required to complete the gable.
2- Over the last siding row, install the first starter clip.
If result obtained in step 1 gives an even number, install
the starting clip centered with the top (Figure B1). With
an odd number, install the starter clip at 2 1/8” (5,40cm)
of the center (Figure B1). By doing so, you will finish
the last row with a complete scale in the middle of the
gable (Figure G). Install the other starter clips at every
9 5/8” (24,45cm) (Figure B1).
3- Cut the first panel according to the roof pitch and
insert into the other starter clips (Figure C1). Insert the
other panels until the end of the row. Make sure to space
equally each panel from one to another (Figure E).
4- Install the next rows into the previous rows by staggering
by at least two scales every other row. Always make sure
that you are aligned (Figure F).
5- Cut the final piece, drill a hole proportionate to the size of
the nail, but smaller than its head and nail in (Figure G).
Note: Do not nail into the extremities holes of the
panel (1 - Figure H), except if there no more nailing
hole above the piece (2 - Figure H).
Download the installation guide
Half-round decorative panel
The perfect finishing touch to add curb appeal and elegance
Warranty
Quality warranty
Novik Hand-Split Shake, Hand-Laid Brick, Hand-Cut Stone, RoughSawn & Half-Round panels are made to respond to the industry’s high standards and North America’s very strict specifications.
Opting for continuous improvements in our products, we are able to provide a transferable Limited Lifetime Warranty.
This warranty supersedes all other warranties, liabilities and obligations; whether oral, written or implied.
Terms
Novik inc. offers a warranty to the original homeowner for the replacement of any product when installed in accordance to the manufacturer’s instructions and exposed to normal weather conditions. Novik inc. also warrants that all sidings will be free from manufacturing defects. These defects include cracking, warping, peeling or excessive discoloration.
Registration and warranty transfer
This warranty will be valid only after the original homeowner completes the warranty registration form and returns it to Novik inc. along with a copy of the proof of purchase & installation contract.(See below for original owner schedule).
Coverage of the Limited Lifetime Warranty
Number of years
after installation |
Covered warranty
on prorata basis |
| 0-7 |
100 % |
| 8 |
80 % |
| 9 |
70 % |
| 10 |
60 % |
| 11 |
50 % |
| 12 |
30 % |
| 13 |
20 % |
| 14 and more |
10 % |
The warranty can only be transferred once by the original owner to an immediate subsequent purchaser (transferee). Upon this transfer, the siding will be covered under the Transferee Warranty coverage schedule and is calculated from the original date of siding installation. It is important that Novik inc. be notified of the property transfer and documentary proof of this transfer be submitted to Novik inc. to ensure coverage. (See below for transferee schedule).
Transferee schedule
Number of years
after installation |
Coverage warranty
on prorata basis |
| 0-5 |
100% |
| 6 |
80% |
| 7 |
60% |
| 8 |
40% |
| 9 |
20% |
| 10 and more |
10% |
Limitations
Noviks’ warranty does not provide protection against any damage caused by events beyond normal weather conditions, including but not limited to:
- Misuse, negligence or improper installation;
- Pollution, mildew, exposure to chemical products or inappropriate cleaners;
- Alterations to siding like painting or varnish;
- Improper handling or storage;
- Defects in material or wall in which Novik inc. siding was installed, caused by movement, cracking or setting of wall or foundation of building;
- Impact of foreign objects, hail, lightning, fire, hurricanes, tornados or any other catastrophic phenomena of nature;
- Vandalism and intentional damage.
Geographic situation, sunlight exposure, air quality and climatic factors may gradually weather the siding. If the siding is determined by Novik inc. to have faded beyond normal expectations, Novik inc. will replace defective material.
Novik inc.reserves the right to discontinue or modify any of its products without prior notice. Novik inc. shall not be liable for variations in color or gloss compared to product that has been installed and exposed to normal weather conditions.
Warranty claims
The buyer has to provide a written description of the damage and manufacturing defect together with original proof of purchase to the following address:
Novik inc.,
Customer Service Department
160, rue des Grands-Lacs
St-Augustin-de-Desmaures (Québec)
Canada, G3A 2K1
The consumer must provide date of installation and proof of property ownership. The claimant may be required to submit a sample of the defective materials for analysis. Novik inc. will analyze the material claimed to be defective and determine the validity of the claim.
For your protection
Novik inc. siding is a very low maintenance product but is made of polypropylene. Common sense should be used to keep siding from melting or burning. It is important that all sources of heat and flames and combustible materials like dry leaves, trash., be kept away from Novik siding.
If the original homeowner or transferee is shown to have neglected to provide proper maintenance to the siding, this warranty will be null and void.
Download the warranty guide (PDF | 266Ko)
family
family
family
family
family
family
Prairie Wheat 
Khaki 
Slate Blue 
Midnight Blue 
Mahogany 
Acadia 
Dutch Green 
Sierra 
Yellowstone 
Sahara 
Heritage Gray 
Sandstone 
Pine 
Slate 
Clay 
Brick 
Umber 
Classic Linen 
Cobalt 
Evergreen 
Sand 
Charcoal 
Sage 
Burnished Slate 
